Insight 5.8G 1080P 200mW Full HD Digital Video Transmission System

• 5G FHD Digital video transmission
- Input support up to 1920 x 1080@60fps，Output support up to 1920 x 1080@30fps
- Use the 5G radio technology，Tx power 200mw(CE certification and FCC certification)
- Ground control with the 5db omnidirectional antenna（standard），transmission distance over 1 km 
- Ground control with the 14db directional antenna（custom），transmission distance over 4km 

• Input and Output
- HDMI Input 
- 5G WI-FI FHD Output：Android phone、Pad can be used as a monitor after connected the APP.

• Anti-interference
- Up link/Down link Using MIMO multi antenna technology and OFDM modulation mode, with advanced algorithms, and effectively improve the stability of the system data bandwidth and complex environment, improve the dynamic performance of the system
- Down link real-time monitoring of each channel interference state, dynamic selection of optimal channel work (up to 24 transmission channels)
- supporting up to 24 devices working at the same time

• Low latency
-System maximum time delay 80ms

• OSD function
-Built in OSD function, you can achieve the information function with the APM pixw pix without the external OSD.

• Bundled flight controller
-Without any restrictions on the APM pixw APP pix built-in digital transmission.

• Multiple mode and information secure
- Ground side can link over two devices.
- To ensure that information only through the ground side of the authorized frequency of the encryption transmission video data can be received.

• Battery and charge
- Ground side built-in 1300mAh large capacity battery, the device can work continuously for 2 hours, can be charged by power bank.
- Sky control input voltage 5-18V

1, Video Input: HDMI

Video Output:5G Wifi Full HD Video Output (Connect the Android Smart Phone or Ipad by APP and they can be used as monitor.)
 
2, Anti-interference performance

- With MIMO,OFDM technology
- The ground line monitor the interference and choose the better channel (24CH)
 
3, Lower Time-Lapse (80ms )
 
4, OSD Function:

- When use Pix, APM, Pixw, don't need external OSD, APP
 
5, Battery and Charging

- Built-in 1300mAh Battery in Ground set, can work 2 hours contiously.
- Input 5V ( 7-28V Wide Voltage Input Module Optional)

Receiver:

- Size: 68mm x 48mm x 15mm      
     
- Weight: 60g
   
- Connector: Micro USB 5V 

- Battery: 1300mAh Battery , 2h              
     

Video Transmitter:

- Size: 62mm x 23mm x 32 mm

- Weight: 45g

- Connector: 5V DC Input

- Power: Mini HDMI x 1  UART x 1  PWM x 4        

- Video input: HDMI

- Support format(HDMI): 720P 50fps . 720P 60fps , 1080I 50fps , 1080I 60fps , 1080P 25fps , 1080P 30fps , 1080P 50fps , 1080P 60fps

- RF parameters: 5GHz，FCC certification

- Interface（Ground control）: LED；power switch；charge input；USB 2.0

- Interface（Sky control）: LED；HDMI input；PWM output；TTL transmission

- Material: Aluminum alloy

- Power（Ground control）: DC 5v Build-in battery (Watts : 6W)

- Power（Sky control）: DC 5~18V (Watts：8W)

- Size（Ground control）:  69 x 49 x 16(mm)

- Size（Sky control）: 67 x 37 x 20(mm)

- Weight（Ground control）: 100g

- Weight（Sky control）: 70g

- Transmission distance（outdoor）： with the 5db omnidirectional antenna（standard），transmission distance over 1.5 km, with the 14db directional antenna（custom），transmission distance over 5km

- Output delay：70ms - 100ms

- Band frequency： 5.1GHz - 5.8GHz

- Modulation mode： MIMO-OFDM

- Video input： Mini HDMI

- Compatible input video format： HDMI all format, up to 1920 x 1080P @60

- Output format： 640 x 480p @30 @60, 1280 x 720p @30 @60, 1920 x 1080p @30

- Compression：HEVC 3A High definition television broadcasting

- Channels：24 channels（Automatic frequency hopping, anti-jamming）

- Support devices：Phone , Pad , PC ( WIFI Support 802.11n/ac ) 

- Support system：Android

- Data interface：UART data transmission interface

- PWM control interface：4 PWM control output, you can control the gimbal and other external devices.

- Communication encryption：256bit encryption

- Temperature：-10℃ - 60℃

- Certification：FCC Certification

Package Included :

- 1 x Transmitter 
- 1 x Receiver 
- 2 x Transmitter antenna
- 2 x Receiver antenna
- 1 x DMI Cable
- 1 x Uart Cable
- 4 x PWM cable

Write a review