Hifei ESC-65A-G Brushless ESC

- Size:  63mm X 31mm X 10mm

- Weight: 48g (With wires)

- Microprocessor controlled

- Extremely low resistance

- 65A continous ( 85A surge )

- Up to 14 cells NiMH/NiCad or 2 ~ 4 Cell Lithium-Polymer

- High rate adjustable switching ( PWM: 8KHz / 12KHz / 16KHz )

- BEC: 3A 

- Support 3 - 4 micro servos

- Programmable low voltage cutoff

- Programmable cutoff types( soft cutoff / hard cutoff )

- Programmable brake type ( disable / soft brake / hard brake )

- Time advance programmable ( low / standard / high )

- Programmable current limiting ( very sensitive / standard / insensitive / disable )

- Governor mode ( low rpm governor / high rpm governor )

- Programmable startup type ( very soft start / soft start / fast start )

- Thermal Protection ( 100 centigrade )

- Apply to most of inrunner and outrunner brushless motors.

- No complex programming, auto adapt work mode.

 - A LED (flashes) indicates the current limiting or temperature protection actived.

- Runs motor in forward or reverse by swapping any two motor wire connections.

- Safe“power on” arming program ensures motor will not accidentally turn on.

- Auto shut down when signal is lost or radio interference becomes severe for more than 3 seconds .After radio connection has been reestablished, moving the throttle to the lowest position can restart the motor.

Write a review