Hifei ESC-35A-G-S Brushless ESC

- Size: 55mm X 27mm X 13mm

- Weight: 37g (with wires)

- Microprocessor controlled

- Extremely low resistance

- 35A continous(50A surge)

- Up to 16 cells NiMH/NiCad or 2 ~ 5 Cell Lithium-Polymer

- High rate adjustable switching ( PWM: 8KHz / 12KHz / 16KHz )

- BEC:3.5A ( Switching BEC ) 

- Support Over 4 micro servos

- Programmable low voltage cutoff

- Programmable cutoff types( soft cutoff / hard cutoff )

- Programmable brake type ( disable / soft brake / hard brake )

- Time advance programmable ( low / standard / high )

- Programmable current limiting ( very sensitive / standard / insensitive / disable )

- Governor mode ( low rpm governor / high rpm governor )

- Programmable startup type ( very soft start / soft start / fast start )

- Thermal Protection ( 100 centigrade )

- Apply to most of inrunner and outrunner brushless motors.

- No complex programming, auto adapt work mode.

 - A LED (flashes) indicates the current limiting or temperature protection actived.

- Runs motor in forward or reverse by swapping any two motor wire connections.

- Safe“power on” arming program ensures motor will not accidentally turn on.

- Auto shut down when signal is lost or radio interference becomes severe for more than 3 seconds .After radio connection has been reestablished, moving the throttle to the lowest position can restart the motor.

Write a review